Glass Pool Fence Compliance at Clear Island Waters
At Pool Compliance Gold Coast, we recently completed a pool safety inspection at a residential property in Clear Island Waters. The swimming pool was enclosed by a modern frameless glass pool fence on two sides, with the remaining barriers forming part of the property’s compliant boundary.
The inspection identified several common issues that prevented the property from meeting Queensland’s pool safety barrier requirements. Fortunately, each issue was able to be rectified quickly without the need for expensive replacement fencing.
Issue 1 – Glass Pool Gates Not Self-Closing
The property featured two frameless glass pool gates.
Although both gates appeared to operate normally, neither would consistently self-close and self-latch from the at-rest position, which is a requirement under Queensland pool safety legislation.
Our licensed Pool Safety Inspector adjusted the gate hinges and carried out repeated testing from the fully open, halfway and resting positions. Once correctly adjusted, both gates consistently self-closed and self-latched, restoring compliance.
Issue 2 – Gazebo Shade Creating a Climb Hazard
Inside the pool area was a gazebo fitted with a shade awning. The awning extended outside the pool barrier and its lower tubular frame created a potential climb point adjacent to the glass fence.
Objects located within the required 900mm non-climbable zone can allow children to gain access over an otherwise compliant barrier.
The solution was straightforward. The gazebo awning was repositioned so that it remained entirely within the protected pool area, removing the climb hazard while allowing the gazebo to continue being used.
Issue 3 – Large Planter Box Too Close to the Barrier
A decorative planter box had also been positioned within the 900mm non-climbable zone adjacent to the pool fence.
Because it was movable, the solution was simple. The planter box was relocated outside the required clearance distance, immediately eliminating the potential climb hazard.
Issue 4 – Faded CPR Sign
The mandatory CPR Sign had deteriorated significantly due to weather exposure. The information had become faded and was no longer clearly legible.
Queensland legislation requires a compliant CPR sign to be permanently displayed and easily readable from the pool area.
A new compliant CPR sign was supplied and professionally installed as part of the rectification works.
Outcome
Following the adjustment of both glass gate hinges, relocation of the gazebo awning, repositioning of the planter box and installation of a new CPR sign, the pool safety barrier complied with Queensland pool safety requirements and was ready for certification.
This inspection is an excellent example of how many pool compliance issues can be resolved with practical, inexpensive solutions rather than major alterations.
At Pool Compliance Gold Coast, we help homeowners, landlords, property managers and real estate agents obtain their Pool Safety Certificate (Form 23) quickly while providing practical advice to minimise rectification costs.
Need a Pool Safety Inspection?
If you require a Pool Safety Certificate, pool inspection, glass pool fence inspection, pool gate adjustment, CPR sign replacement, or advice on pool barrier compliance, contact Pool Compliance Gold Coast today.
We provide professional pool inspections throughout Clear Island Waters, Robina, Mermaid Waters, Broadbeach Waters, Benowa, Carrara, Ashmore, Surfers Paradise, Hope Island, Helensvale, Paradise Point, Runaway Bay, Biggera Waters, Parkwood, Varsity Lakes, Burleigh Waters, and surrounding Gold Coast suburbs.
Pool Compliance Gold Coast
